Loading... Please wait...


Our Newsletter

QT3D-Gopro V2.1 gopro 3 axis brushless gimbal (work for gopro1/2/3/3+/4)

  • Image 1
  • Image 2
  • Image 3
Calculated at checkout

Product Description

QT3D-Gopro V2.1 gopro 3 axis brushless gimbal (work for gopro1/2/3/3+):

based on MC6500GoPro-BLG v2 new 3 Axis Brushless Gimbal.

new QT3D gimbal works for gopro1, gopro2, gopro3, gopro3+. gopro 4

 (assembled gimbal, ready to use , Alexmos version, please do not change any factory setting , do not revise and reload any software factory did. all is set done by factory, ready to use. )


New manual check here: http://cnchelicopter.com/content/09012014/QT3D-goproV2_1_manual.pdf


Finished full weight: (without Gopro camera) 288g 
Total height: 133mm (when mounted with pieces), to meet the X650 rack mount 
Operating voltage: 11.1V-12.6V (3S lithium drive) 
Tilt rotation range: 40 degrees positive / negative 90 degrees 
Roll rotation range: plus or minus 45 degrees 
Direction of rotation range: plus or minus 90 degrees (lock mode) / plus or minus 45 degrees (follow mode) 
The camera can be installed: Gopro1,Gopro2,Gopro3 and Gopro3 + 
* If the power voltage is greater than 12.6V, please use AKE SuperPMU (must be set to 12V output) antihypertensive treatment. 
xmhobbies AKE Super PMU (UBEC-5A6S) high voltage regulator (high voltage input, 7.2V/12V output)
Control function: pitch, roll, direction, mode (up to four receivers occupy idle channel)
















gimbal works great with gopro hero 4 too.



Product Videos

www.cnchelicopter.com QT3D-gopro 3 axis brushless gimbal ()
  • www.cnchelicop...

Find Similar Products by Category

Add to Wish List

Click the button below to add the QT3D-Gopro V2.1 gopro 3 axis brushless gimbal (work for gopro1/2/3/3+/4) to your wish list.

You Recently Viewed...