** ** Under the stabilisation mode and positioning mode, maximum rotate speed allowed:
Aileron and Elevator: ≤200°/ s === Tail turning (if using external gyro): ≤360°/ s
Voltage: 4.8-6.0V ** Current: 55mA (under 5V)** Temperature: 0℃~ +40℃
KDS Flymentor 3D has following functions:
Control all movement, including attitude stabilization, speed control, position locking.
CCD sensor to capture picture of ground, comparing pictures to avoid drifting. Integrating head locking gyro and swashplate mixer. Keep balance in inverted flight. Configure by computer through USB. If you are using FM/PPM remote control device, when helicopter is out of control, the Flymentor 3D will set aileron, elevator, rudder to neutral, and keep pitch in the final signal position, and switch to positioning mode automatically, the sensitivity is 70%.
Switch working mode (horizontal mode and position mode) through AUX channel.
Control sensitivity and mode of internal gyro through GEAR channel. Support swashplate 3S 120º, 3S 140º, 4S 90º, 4S 90º+45º
E-manual : check here