hobbywing head lock gyro G3
User Manual

secification

1.1 Input:  4.5-6.5V,  operating current = 50mA, maximum current <100mA  

1.2 Size: 26mm*24mm*9mm

1.3 Weight: 12g

1.4 Suitable Servo:

        Analog Servos (frequency 50Hz), servo neutral point: 1520us  
        Digital Servos (frequency 333Hz), servo neutral point: 1520us
       Note: This gyro is not compatible with following servos: 
       Futaba- S9251, S9256, BLS251 
       JR-2700G, 8700G, 810G 
1.5 Accessories:  
        2 pieces of adhesive foam pads 
        1 piece of  steel plate for vibration isolation

 

2   Features

 

2.1 Dual working modes:  Normal mode and Head-lock mode, switched by the sensitivity value of the GAIN channel of your transmitter.

2.2 Compatible with analog servo and digital servo. 

2.3 User programmable. The programmable items are the followings:

        Servo type (Digtal  / Analog)  
        Servo travel direction (Normal / Reversed)
        Servo travel limit of normal direction  
        Servo travel limit of reversed direction

2.4 Excellent angular rate sensor: The Gyro uses advanced MEMS (Micro Electro Mechanical Systems) angular rate sensor to get super performance.

2.5 Advanced algorithm: AVCS (Angular Vector Control System) algorithm provides best tail-control performance.

2.6 Built-in temperature compensation:  It provides high-precision direction control ability to eliminate the drift caused by environment temperature changing.

2.7 Completely digitalized to make the gyro more reliable: Each programmable value is adjusted by a SET button without any analog component such as trimming potentiometer. 

2.8 Own intellectual rights: Without any risk of lawsuit.

E-mail a friend about this item.