cnchelicopter xmhobbies New XM-Y6FG-500 professional six rotors aircraft Basic version:
(battery /camera/radio/receiver is not included, customer need to prepare yourself)
support GPS and ground station
customer need to easy assemble yourself.
Detail technical info :
==================================================================
SIGMA XM-Y6FG-500 is a Y shape 6 rotors micro UAV remote control, it looks cool enough Any time, any occasion to attract people's attention. However, we believe, can really make you deep infatuation
,In addition to its unique appearance, as well as its superior performance and its robust expansion.

SIGMA XM-Y6FG-500 aircraft uses an innovative Y-6 rotor (referred to as Y6) structure, which owned
There are 3 rocker (Three arms), installed 2pc high-performance brushless motors on top of each arm and down side.
 , the 6 high-speed I2C bus 10A Brushless ESC-driven, the maximum total output power> 650W. Entire
aircraft were equipped with 6 brushless motors, brushless motors each driving a separate 10-inch propeller, flying
Power come from this six high speed propeller, they continuously generated power with over 8000RPM speed .
each arm are Coaxial-rotating propeller Structure, with unparalleled stability (similar to the Lama co-axial helicopter.) Y-shaped
Structure at the same time and has good mobility and accuracy. XM-Y6FG-500 therefore not only unusual flight performance
Stability, but also had dexterity and precision. Coupled with its small size, the other large aircraft can not reach
Place, XM-Y6FG-500 is able to fly easily.
Not only that, SIGMA XM-Y6FG-500 also has robust security - when one of six brushless motor, 6 spiral
Paddle or 6 ESC component failure, SIGMA XM-Y6FG-500 will still rely on
the balance 5 sets of power system to maintain normal flight! Higher security requirements users, SIGMA xm-Y6-
500FG aircraft will be a good solution.

Multi-rotor aircraft top important is electronic sensors - angular velocity transducer sensors (commonly known as gyro chip)
SIGMA XM-Y6FG-500  the flight control system uses a highly respected professional ADXRS610, this chip
Sensor known as the most luxurious, the cost is 10 times of an ordinary piezoelectric gyroscope chip , it also has extreme
Excellent and stable electrical performance. Also has strong anti-vibration capabilities (flight control even do not need to do a special
shock treatment), and strong ability to adapt to the temperature (stable work between -40 ℃ - +105 ℃ ), is widely used in industry And
military fields of robotics, unmanned aerial vehicles and other equipment. When you see the ADXRS610,
it means that system had a top high-performance!

SIGMA XM-Y6FG-500 high-performance three-axis acceleration sensor -- expensive LIS344ALH .
has a very excellent electrical performance And the seismic capacity, its performance is far superior to other products
used in micro-mechanical acceleration sensor (such as MMA7260, more than 95% similar products use MMA7260 in this
micro-mechanical acceleration sensor, not only the signal noise Extremely sensitive to the vibration and pitch, to a
large extent limited the performance of ADXRS610).
when you look at the oscilloscope, Stationary state LIS344ALH output signal is a straight line without any noise!
This is the traditional micro-mechanical acceleration sensor can not achieve. Good horse with a good saddle !!!
SIGMA XM-Y6-500FG did not ignore the sensor external circuit design, flight control board use all 4 layers
PCB board trace + Immersion Gold extraction, in the fundamental guarantee for the stability of the circuit and
anti-jamming capability; power supply part --- use the luxury 2pc  up to 1A of DC-DC Module ( almost no heat ,
provide all aircraft electronic equipment power, including  provides plenty of current for remote control receiver)
and a Panasonic audio grade capacitors +10 tonic black stars NEC Top gall capacitor (for the entire current circuit
to provide very pure, completely eliminate any clutter on the sensor interference); other flight control chip
components all use  1% precision resistors, capacitors 5% (the highest industry standards) TDK High 0805 large-size
power package components, rather than similar products commonly use 0402 or 0603, and fully guarantee the
accuracy of the signal.

three ADXRS610 and one high-performance three-axis acceleration sensor (top quality LIS344ALH)--- formed SIGMA
XM-Y6FG-500 attitude & heading reference system (AHRS, Attitude & Heading Reference
System), the system can accurately sense changes in flight attitude, for example: before and after the pitch, and about
Tilt, and make real-time correction, so always maintain aircraft a level flight status, the process is completely automated
, And very quickly. SIGMA XM-Y6FG-500 has two flight modes - "flight mode" and "hanging
Stop mode(hovermode) ", default is" hover mode. "If you like to change, you can use parameters Adjusting software to change to
"flight model." Two models have different control feeling, "flight model" suitable for Violence Maneuvering Action.
 but the "hover mode" is forkeeping the "automatic level flight" status. you want to use the GPS in the future,
Hover function and auto return etc feature, you must be set to "hover mode."

SIGMA XM-Y6FG-500  flight control system integrates a high pressure sensor(MPX4115A) can result in aircraft altitude
Constant, this feature can switch channels on the remote control to "off" or "open", control easily.
This feature  factory default setting is "off" ,because of the different air pressure in each region, you need to adjsut it yourself,
Then turn on this feature. SIGMA XM-Y6FG-500 has a three-axis gyro augmentation PTZ control function, can be most
Large extent enhance the stability of aerial images. This feature requires camera mount and the steering gear servo .
Use. SIGMA XM-Y6FG-500 comes standard with a single-axis camera mount, you can use the pitch axis stability augmentation function
.

SIGMA XM-Y6FG-500 has been completed calibration parameters at the factory , when got it , only need
Simple assembly and connection, and adjust the pros and cons of each channel remote control rudder. It takes all of these preparations
Time about 15 minutes , then you can take off smoothly. Of course, we also provide you with a professional
parameters Adjusting software, computer through the USB interface to connect to SIGMA XM-Y6FG-500, so you can adjust
all flight parameters, to achieve the best your performance requirements.

In addition, SIGMA XM-Y6FG-500 also has a strong extended features, such as: lighting control system,
For example: had 2  lighting control system  ( can freeely set 2 sets Led light flashing way);  also comes with five way standard pwm signal
output,  two of five  can use for incraseable stablity  for 2 axis camera mount output. other 3-way for players customize.
Function; own low-voltage alarm function, by adjusting the parameter software ，players can do any setting for alarm voltage,
when the voltage is low than the set value, the buzzer will issue the
rapid alarm tone.
through Installation of GPS and electronic compass to obtain independent hover and automatic return function,
as well as data transmission through the installation of electricity
station, a complete ground station function (can set waypoints, real-time monitoring of changes in flight routes and aircraft flight
Line). The use of these extensions require that you have some knowledge of reserves and operational experience, if you still
Is an R / C Hobby beginner, we recommend that you carefully try these complex functions.
The SIGMA XM-Y6FG-500 basic version is easy to use, it is suitable for all players - from beginners to Flight master.

SIGMA XM-Y6FG-500  minimum requirements for the remote control is a 4-channel remote control, compatible with 2.4G and
72M/40M/35M PPM or PCM, recommended Futaba 6EX/FF9/T8FG/10C/12FG/14MZ etc style 2.4G or 72M models.
The battery --- recommended 3300mAh/11.1V/25C, 4000mAh/11.1V/25C and
5200mAh/11.1V/25C polymer lithium battery.

Optimum load weight <700g,
flying time 10-15 Minutes (depending on load weight and battery capacity).

SIGMA XM-Y6FG-500 Basic Edition (Basic Version)
The main features :
- Y-shaped 6-axis structure, a very cool appearance, stable flight performance, superior security
- Standard Single Axis PTZ cameras and PTZ-driven steering gear, when got it, will be ok to do aerial photography, can be stabilized by gyro
- Integrated two-axis gyro augmentation PTZ control
- Use ADXRS610 luxury Gyro Chip
- Integrated pressure altitude sensor flight control
- Compatible remote control 2.4G/PPM/PCM
- Minimum requirement of only 4-channel remote control (recommended more than 10 channels remote control)
- simple assembly and adjustment, then ok to fly, no parameter adjustment
- Scalable self-hover, auto-return and ground station capabilities

SIGMA XM-Y6FG-500 based version ---- standard
1x XM-Y6FG-500 glass rack
1x XM-Y6FG-500 MK 2.0 Flight Control
1x PPM decoder board
6x 10A MK I2C Brushless ESC
6x QD800B Brushless Motor
6x 10 inch propeller
1x Single axis camera mount.(you need to assemble it, need to prepare your own 9g servo)
1x USB connecting board and cable

You also need to prepare your own equipment to fly aircraft:
At least 4-channel remote control (transmitter + receiver)
Lithium Battery
Lithium battery charger
Recommended : BM05N power alarm (the alarm set at 3.4V)

SIGMA XM-Y6FG-500 basic version technical parameters:
ESC power: 120W (CONT.)
Motor power: 150W (MAX)
Length: 480mm
Overall width: 550mm
Height: 235mm
Minimum ground clearance: 163mm
camera mount width: 103mm
camera mount height: 62mm
camera mount ground clearance:55mm
Maximum flight weight: <1.8kg (recommended)
No load weight: 960g (not including photographic equipment and batteries)
Typical flying weight:  1500g ( for example:FX580 and 5200mAh/11.1V battery weight included)

SIGMA XM-Y6FG-500 Basic Version (Basic Edition) Suitable for beginners to master flight.

==================================================================

Notice:   from 04/30/2012, we will ship partial light green        parts for customer too or full version light green version for customer too.