Up to 6 groups output ports, 11 multi-axis style let you select, and set up simple, extremely easy to use, performance is really amazing! This is world famous and popular  White Dragon.KK K6300S multi-axis flight control board.

K6300S application notice points:

1. KK flight control rely on the ESC's BEC power supply ,voltage 3.3V-5.5V, connected to ESC, then begin to work, do not need to consider fly control board power. and receiver's working voltage come from ESC, do nto need to consider receiver power supply.

2. KK flight control had 6 output ports, ok to connect to ESC or servo, but at least had one port connecting to ESC.

3. KK flight control --- 6 output ports and 4 input port should be careful for the connecting  order, marked with "S" is the signal pole, if connect wrong will cause fly control board burned.--------------should be very careful.
4. Unique Start mode: : put in the low throttle position, press the right rudder, flight control red light start, then push the throttle, then motor can start , then ok to go normal flight;      throttle low, left rudder, red light is off, then Push the throttle , the motor will not rotate.

K6300S products Features:
- Flight control 100% assembled, no extra welding
- Using high quality components, stable performance, excellent quality.
- Integration of all components (including 3-axis gyro)
- Easy to use, debug, easy to apply to all multi-axis rack
- Rely on tone-bit device regulate 3 axis gyro sensitivity
- Support for a total of 11 multi-axis type (single-axis, 2 axis , Y-type 3-axis, Y-type 4-axis, 4 axis cross, X word 4-axis, Y-6 Axis, the distribution 6-axis), according to your choice --- pre-burned into the flight control program (select one of 9 type mode),  default shipping type is cross 4 axis.
- Output port up to 6 groups, ok to drive ESC or servo .

- Standard PWM signal output, support for normal PWM ESC (recommended AKE HSP Series High Speed ESC--- cnchelicopter.com had listing for sale) and all types servo (digital or analog)
- Receiver can be directly connected to the flight control panel, without a special decoder or receiver changes
- The existing version can achieve stable hover and excellent handling (depends on the reasonable match, commissioning and operating experience), the operation similar to  remote control helicopter buit easy to learn.
- Can make a flip and dynamic stunts and other major scrubbing pots; and go with  stable flying , to meet the small-scale aerial photography, replacing complex and expensive Aerial helicopter
- Support for self-upgrades firmware , performance continues to improve, or may support more types of multi-axis.

-K6300S Specifications:
Size: 50mm x 50mm x 15mm
Weight: 13.5g
Installation hole diameter: 3.0mm
Installation hole distance : 45mm

Shipping configuration:
White Dragon 1x KK multi-axis flight control (K6300S)
1x USB Programmer adaptor
cables.
========================================================================
detail manual check:
http://www.cnchelicopter.com/01202011/06072011kkcopter.pdf

firmware:
http://cnchelicopter.com/01202011/05112011KKSoft.rar

=========================================================================

Frequently Asked Questions
Q: KK whether to support GPS and ground station?
A: Not supported. It is a pure multi-axis flight control, supports nine kinds of multi-axis structure type, the program can be upgraded. If you need
GPS or ground station functionality, we recommend the use of more advanced multi-functional flight control, such as XAircraft FC1212-S.
Q: I had my own DIY rack , KK can support?
A: If your rack structure meets the definition of KK, of course, be able to support. Please check manual for 9 kind  KK support structure types.
 
Q: KK only had 3-axis gyro, but do not have accelerometer sensor , is there any effection?
A: up to the flight, there is no any effect. It flies like a helicopter control feeling . Due to absence of acceleration sensor Participation, it will not return posture correction, can avoid resulting in a slight aircraft shaking , it can maintain stability flying  under any gesture .Flying is more suitable for small-scale aerial applications.
 
Q: I was allowed to burn into the flight control program?
A: Sure, as long as you had USB programmer adaptor, connect to your computer can proceed. But burning should be careful, the wrong Operatingwill cause  the flight control locked, it may not be able to use. Please burn in strict accordance with our instructions. ---very carefully, do not burn some other feature you do not know and like to try . it is dangerous.
 
Q:  can you recommend matching high performance brushless motor /ESC for us ?
 
A: Recommended AKE High Speed ​​PWM (HSP) Series 10A or 20A brushless ESC is designed for multi-axis aircraft, the refresh rate up to 500Hz, with the throttle calibration function;  cnchelicopter.com had it for sale.
brushless motor recommended AKE Quad Dancer series dedicated multi-axis brushless motor  KV value  800KV, 1100KV two style ---cnchelicopter.com had for sale.

=====================================
Notice for  our flight control board USER: 
 can not use high-speed receiver, otherwise will damage the chips on the flight control.
These high speed receiver --- include futaba receiver had HS stitching. for example 6014HS etc.
Standard receiver ok to work well with this flight control board:
for example: 72M/40M/35M and standard 2.4G receiver or any compatible 2.4G receiver