SA725 Deluxe G3 amplifiers the perfect support for any remote control of analog output port, support Futaba PCM and PPM model, but also support other remote PPM mode! 2.4G remote control or other remote input 
is PPM, of course, can also be connected with the SA725 Deluxe G3, mode is the PPM's.

Main features:
1. SA725 Deluxe G3 is equivalent to an external 72MHz frequency tuner and adjustable transmit power and
frequency point. You have to do is unplug the remote control of the crystal or tuner, amplifier through
the analog line access, it becomes a power amplifier for 72MHz output with the frequency range 70MHz ~ 80MHz adjustable, adjustable power 1 ~ 7W.

2. Futaba 10C 2.4G version only had PPM model , no PCM model , only origianl 72MHz 10C had PCM mode and  ok to use PCM receiver.

3. SA725 Deluxe G3 sensor head and amplifier can be shared! Futaba FF9 or 10C, etc. remote control head port
to connect to analog sensors or video glasses, head pins to connect to high-frequency amplifier hosts
(there with a dedicated line) works: the first pass through the analog line to the remote control signal,
the remote control All signals to the tuner integrated pin, that is, the supply of power amplifier.  
===============================================================
the following first pic displayed all you will get:

FAQ: 
customer Question: what is the difference between SA725 and SA725 Deluxe G3 ?


SA725 / SA725 Deluxe G3 :
Built-in tuner:        No          Yes
Can set the frequency: No          Yes (built-in tuner can be set 72M 50 frequency points, and through the LED display)
From the analog port to take the remote control signal: No  Yes (benefits: do not need to weld )
From the remote control tuner to access information: Yes No (disadvantage:  need to weld yourself)
Adjustable transmit power: No  Yes (old style  power is fixed 7W, the new transmission power can adjust. 1-7W)
Support PCM: Yes Yes
Support PPM: Yes Yes