DJI Wookong Multi-Rotor stabilization controller system
DJI WookongMulti-Rotor stabilization controller system: (we only ship to paypal confirmed address and Bill to address, email wire transfer deal is welcome):
Normally this item will take 3-5 days to ship out. =====================================================
DJI Wookong Multi-Rotor stabilization controlleris a complete flight system for all multi-rotor platforms for commercial and industrial AP applications. Unlike others, WooKong allows the use of regular ESC commonly used in RC helicopter without any wiring modification; Heli mode setup providing a seamless transition for current Ace One AP professionals. WK-M utilizes high quality components precisely calibrated with temperature compensation in all gyros and sensors, industry renounce flight algorithm in autopilot and UAV. IMU damping system is rated for gas engine best in the class.
Attitude mode maintains precise altitude hold for indoor flight while GPS mode provides superb position hold outdoor. External LED flight mode indicator light can easily be observed by pilots under any condition.
WK-M can be flown in one single full auto (GPS-Atti) mode from take-off to landing; or in Atti mode while manual mode has stabilization activated. The system is easy to install with user friendly software allowing on-line firmware and software upgrade.
TECH SPEC
General specifications
Built-In Functions:
Autopilot
Auto Hover Fail Safe
Multi Rotor Types:
Quad-Rotor
Hex-Rotor
Octo-Rotor
Supported ESC output:
200Hz refresh frequencys
Recommended Transmitter:
PCM or 2.4GHz with minimum 5 channels and Failsafe function available on all channels
Recommended Power Supply:
DC 4.8 ~ 12V
Power Consumption:
MAX 5W
(0.9A@5V, 0.7A@5.8V,0.5A@7.4V,0.4A@8V)
Operating Temperature:
-5°C to +60°C
(You have to keep the IMU warm if you want to use it under low temperature, could be -5°Cor lower.)
Flight Performance (can be effect by mechanical performance)
following is application reference video and pic , for reference:
--------------------------------------------------------------------------------------------------------------------------- Notice: x650 V4 customer use DJI WKM , need to change ESC to our AKE 12A ESC --stnadard ESC.
============================================================= DJI WKM PDF MANUAL:
=============================== WKM working power can be achieved from the following three ways: 1) Original PMU module (power management module), the module is currently standard equipment, after installing , it had lower voltage automatically return function. 2) obtained power from the ESC's BEC . 3) other BEC power by customer own prepared.
instruction: ------------------------------------------------------------- 1 Recommended mode is 1, that is, use the original PMU module. When using the first way, be sure to disconnect the power cord red signal cord, the purpose is to disconnect the ESC's BEC power supply. (2) When not using the PMU modules, we can use the ESC's BEC provide power , it require ESC's BEC output current at least 2A (some ESC only had 1A output,only 1A will cause WKM working not stable.). 3 When not using the PMU, do not use the ESC's BEC power, we can use other external BEC provide WKM power, requiring BEC output current of at least 2A. --------------------------------------------------------------------------- As the PMU has a certain weight and power consumption, customers can choose ESC's BEC supply or use of other independent BEC power supply. according to their actual needs.
